Queen Bed Frame with 16" Comfort Wingback & Charging Station

About this piece

A queen platform frame. The mattress it takes measures 60 x 80 in. Put together it stands 63 in wide by 84 in deep by 50 in high.

Structurally it is built from solid wood, 12 slats across the deck and 9 legs reaching the floor. What it holds: 8 in of clearance underneath.

Built-in power gives you a USB-A port. What it does is move the socket to where the phone actually sleeps. It does not add capacity to the room. The 16 in wingback holds pillows in place and gives the top of each wing a narrow ledge.

Details worth knowing: the slat bearings are damped, which is where bed noise comes from and no box spring is needed. Assembly takes about 30 minutes with the tools supplied.

A bedroom is planned around one number nobody prints: the walking space left once the bed is in. Two feet on any side you use, thirty inches at the foot if there is a route past it. Frame dimensions rather than mattress dimensions are the ones to measure with, and they are on every page in bedroom. The full arithmetic is in The Bed Frame Guide: Slats, Storage and Why Beds Squeak.

Where a figure is missing from the table above, it is missing from the manufacturer’s documentation rather than from this page. The rest of the iPormis bedroom range is written to the same rule.