Full Bed Frame with 16" Comfort Wingback & Charging Station

About this piece

This is our full size frame, built around a 54 x 75 in mattress.

Structurally it is built from solid wood, 12 slats across the deck and 9 legs reaching the floor. For storage there are 8 in of clearance underneath.

Built-in power gives you a USB-A port. It is an extension of the socket it plugs into rather than a circuit of its own. The 16 in wingback holds pillows in place and gives the top of each wing a narrow ledge.

Two or three smaller things: the slat bearings are damped, which is where bed noise comes from and no box spring is needed. Assembly takes about 30 minutes with the tools supplied.

Every bed page here states the three numbers that decide how a frame lives: slat spacing, total weight capacity and the clearance under the frame. Slat spacing matters most, because a mattress warranty usually requires slats no more than about three inches apart, and a frame that fails that quietly voids the mattress rather than the frame. The rest of the room is on bedroom, and how to choose a size is worked through in The Bed Frame Guide: Slats, Storage and Why Beds Squeak.

Where a figure is missing from the table above, it is missing from the manufacturer’s documentation rather than from this page. The rest of the iPormis bedroom range is written to the same rule.