Full Size Lift Up Storage Bed Frame with Charging Station

About this piece

This is our full size frame, built around a 54 x 75 in mattress.

Structurally it is built from velvet and linen, with wooden slats, rated to 1,000 lb.

There is a charging panel with 2 AC outlets, a USB-A port and a Type-C port. It is an extension of the socket it plugs into rather than a circuit of its own. The mattress deck lifts on gas struts, so the entire footprint of the bed becomes one compartment and no floor space is needed at the sides.

Details worth knowing: the slat bearings are damped, which is where bed noise comes from and no box spring is needed.

The two failures a bed frame actually has are a dip in the middle and a click when somebody turns over. The first comes from support: legs down the centre line rather than only at the corners. The second comes from slats resting on bare metal. Both are stated on every page across bedroom, and both are worked through in The Bed Frame Guide: Slats, Storage and Why Beds Squeak.

The same specification table appears on every page of iPormis bed frames, which is the point of publishing it: two models are only comparable when the same figures are given for both.