Queen Bed Frame with 2 Storage Drawers

About this piece

A queen frame, sized for a 60 x 80 in mattress.

Underneath the finish it is built from linen, with steel slats, rated to 1,000 lb. What it holds: 2 drawers.

Power is built in: 2 AC outlets and a Type-C port. The panel draws from a wall socket rather than being a circuit in its own right, so the usual limits on an extension apply.

The rest of the specification: the slat bearings are damped, which is where bed noise comes from, no box spring is needed and the surface is finished to resist water. Assembly takes about 30 minutes with the tools supplied.

Every bed page here states the three numbers that decide how a frame lives: slat spacing, total weight capacity and the clearance under the frame. Slat spacing matters most, because a mattress warranty usually requires slats no more than about three inches apart, and a frame that fails that quietly voids the mattress rather than the frame. The rest of the room is on bedroom, and how to choose a size is worked through in The Bed Frame Guide: Slats, Storage and Why Beds Squeak.

The same specification table appears on every page of iPormis bed frames, which is the point of publishing it: two models are only comparable when the same figures are given for both.