Queen Floating Bed Frame with LED Lights & Charging Station

About this piece

A queen frame, sized for a 60 x 80 in mattress.

Structurally it is built from steel frame, 11 slats across the deck.

Built-in power gives you 2 AC outlets and a USB-A port. The panel draws from a wall socket rather than being a circuit in its own right, so the usual limits on an extension apply.

Two or three smaller things: the slat bearings are damped, which is where bed noise comes from and no box spring is needed.

On any frame the figures that decide how it lives are the same three: how far apart the slats sit, how much the frame carries in total, and how much support runs down the centre line rather than only at the corners.

The two failures a bed frame actually has are a dip in the middle and a click when somebody turns over. The first comes from support: legs down the centre line rather than only at the corners. The second comes from slats resting on bare metal. Both are stated on every page across bedroom, and both are worked through in The Bed Frame Guide: Slats, Storage and Why Beds Squeak.

Where a figure is missing from the table above, it is missing from the manufacturer’s documentation rather than from this page. The rest of the iPormis bedroom range is written to the same rule.